Products / Hubs, Port Multipliers, Repeaters, Redrivers / Hubs / USB 3.2 Gen 1 (USB 3.0)

Phased out

U3H414E

Four downstream ports USB 3.0 HUB (3.5 inch FDD Form Factor) w/USB Battery Charging spec 1.2 (CDP)

Specifications

Downloads

Highlights

USB 3.0 Compliant Hub, TID# 330000037
Supports USB 3.0 SuperSpeed (5Gbps), USB 2.0 Hi-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
Supports Spread Spectrum Clock (SSC)
Multi Transaction Translator (MTT) Hub: Four Transaction Translators, One Per Port
3.5" FDD Form Factor
Provides USB 3.0 cable port lock mechanism
- One upstream USB 3.0 cable port (Standard B-type Receptacle) lock mechanism
- Four downstream USB 3.0 cable ports (Standard A-type Receptacle) lock mechanism
Supports USB Battery Charging Specification Revision 1.2 for Charging Downstream Ports (CDP).
No Special Driver Requirements; Works Seamlessly With Any Operating System With USB Stack Support

Introduction

U3H414E is a high-performance four-port Universal Serial Bus (USB) 3.0 compliant Hub.

U3H414E allows for a maximum data transfer rate of up to 5Gbps, or ten times the throughput available to USB 2.0 based devices. Other enhancements provide for improved interaction between device and host controller, including important advancements in power management.

U3H414E provides simultaneous SuperSpeed USB and High-Speed/Full-Speed connections on the upstream port and provides SuperSpeed (5Gbps) USB, High-Speed (480Mbps), Full-Speed (12Mbps), or Low-Speed (1.5Mbps) connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports High-speed or Full-speed/Low-speed connections, SuperSpeed USB connectivity is disabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports Full-speed/Low-speed connections, SuperSpeed USB and High-speed connectivity are disabled on the downstream ports.

Technical Specifications

USB 3.0 Compliant Hub, TID# 330000037
- Upstream Port Supports SuperSpeed USB, High-Speed and Full-Speed Connections
- Supports Four Downstream Ports
- Each of the Four Downstream Ports Support SuperSpeed USB, High-Speed, Full-Speed/Low-Speed Connections
USB 2.0 Hub Features
- Multi Transaction Translator (MTT) Hub: Four Transaction Translators, One Per Port
- Four Asynchronous Endpoint Buffers Per Transaction Translator (TT) for Better Throughput Than the USB Required Minimum of Two Buffers Per TT
Provides Upstream Connection status LEDs (SuperSpeed and High-Speed):
- High-Speed status LED
  - Off = Hub in low/full speed mode
  - On = Hub in high-speed mode
- SuperSpeed status LED
  - Off = Hub not in SuperSpeed USB mode
  - On = Hub in SuperSpeed USB mode
Downstream Port Configuration:
- Enabled all Downstream Port
- Marked as Removable
- Battery Charging Enabled
  - Supports USB Battery Charging Specification Revision 1.2 for Charging Downstream Ports (CDP).
U3H414E1 Power
- DC Power input Connector: Walkman-type 2.0 mm DC Jack
- Power Input Range: DC 9 ~ 24V ( max. 5.0A)
U3H414E2 Power
- DC Power input Connector: MINI-COMBICON Header
- Power Input Range: DC 9 ~ 24V ( max. 8.0A)
Self-powered operation.
Downstream USB Bus Power
- Each downstream Port (P1 ~ P4) can supply up to 2.1A.
Supports Over-current detection and Individual power control.
Provides downstream ports Bus-Power indicator LEDs (Green)
Customizable vendor ID, product ID, and device ID.
USB 3.0 cable ports (Provides USB 3.0 cable port lock mechanism)
- One upstream port (Standard B-type Receptacle)
  - Type 1 for 34U3H414E & 35U3H414E
    
    USB 3.0 Standard B-type lock mechanism
  - Type 2 for 36U3H414E
    
    USB 3.0 Standard B-type lock mechanism
- Four downstream ports (Standard A-type Receptacle)
- - Type 1 for 34U3H414E
    
    USB 3.0 Standard A-Type lock mechanism
  - Type 2 for 35U3H414E & 36U3H414E
    
    USB 3.0 Standard A-Type lock mechanism

Applications

Available Models

U3H414E1 Walkman-type 2.0 mm DC Jack	U3H414E2 MINI-COMBICON Headers

Physical Dimensions

3.5" FDD Form Factor
25.4mm (H) x 101mm (W) x 90mm (D)
NW: 262g

Certifications

CE Test: Pass
FCC Test : Pass
VCCI Test: Pass

Kit includes

U3H414E1

Kit 1: (U3H414E1-xx)

U3H414E1 4 port USB 3.0 Hub
CB-00541/745 --- USB 3.0 A Plug to USB 3.0 B Plug with Jackscrews (M2 pitch:16.5 or 22mm) Cable 1M or 2M
PS-00025-03 --- AC to DC Power Adapter (12V/5A)
xx: AC power cord 6 feet length (option)
- US: North America Plug (NEMA 5-15) --- CB-00260-02
- EU: Europe Plug (CEE 7-VII Schuko) --- CB-00264
- UK: British Standard Plug (BS 1363) --- CB-00103
- AU: Australia Plug (AS3112) --- CB-00272

Kit 2: (U3H414E1-xx2)

U3H414E1 4 port USB 3.0 Hub
CB-00537/-01 ---USB 3.0 A Plug with two Jackscrews (M2 pitch:19mm) to B Plug with two Jackscrews (M2 pitch: 16.5mm) Cable 1M or 2M
PS-00025-03 --- AC to DC Power Adapter (12V/5A)
xx: AC power cord 6 feet length (option)
- US: North America Plug (NEMA 5-15) --- CB-00260-02
- EU: Europe Plug (CEE 7-VII Schuko) --- CB-00264
- UK: British Standard Plug (BS 1363) --- CB-00103
- AU: Australia Plug (AS3112) --- CB-00272

Kit 3: (U3H414E1-xx3)

U3H414E1 4 port USB 3.0 Hub
CB-00630-02 --- USB 3.0 A Plug with two Jackscrews (M2 pitch:22mm) to B Plug with two Jackscrews (M2 pitch:22mm) Cable 2M
PS-00025-03 --- AC to DC Power Adapter (12V/5A)
xx: AC power cord 6 feet length (option)
- US: North America Plug (NEMA 5-15) --- CB-00260-02
- EU: Europe Plug (CEE 7-VII Schuko) --- CB-00264
- UK: British Standard Plug (BS 1363) --- CB-00103
- AU: Australia Plug (AS3112) --- CB-00272

U3H414E2

Kit 1: (U3H414E2-KIT1)

U3H414E2 4 port USB 3.0 Hub
CB-00541/745 --- USB 3.0 A Plug to USB 3.0 B Plug with Jackscrews (M2 pitch:16.5 or 22mm) Cable 1M or 2M

Kit 2: (U3H414E2-KIT2)

U3H414E2 4 port USB 3.0 Hub
CB-00537/-01 ---USB 3.0 A Plug with two Jackscrews (M2 pitch:19mm) to B Plug with two Jackscrews (M2 pitch: 16.5mm) Cable 1M or 2M

Kit 3: (U3H414E2-KIT3)

U3H414E2 4 port USB 3.0 Hub
CB-00630-02 --- USB 3.0 A Plug with two Jackscrews (M2 pitch:22mm) to B Plug with two Jackscrews (M2 pitch:22mm) Cable 2M