PCIEX16D03

• One PCIe x16 Slot (J2) for Target Cable Adapter
  • PCIe x16 Slot PCI-E 4.0 SMT Type
• Two PCIe x16 Slots (J1/J3) for PCIe Add-in Cards (x8 mode)
  • PCIe x16 Slot PCI-E 4.0 SMT Type

PCIEX16D03 is PCIe x16 to Dual PCIe x16 (x8 mode) Expansion Docking Board.

Requires an target adapter card in the host interface card slot. The PCIe x16 3-slot Docking Board supports up to two PCIe x1/ x4/ x8/ x16 add-in Cards.

• Upstream Facing Port (J2): For Target cable adapter
  • PCIe x16 Slot PCI-E 4.0 SMT Type
• Downstream Facing Port (J1/J3): Support PCIe x1/ PCIe x4/ PCIe x8/ PCIex16 Add-on Card
  • PCIe x16 Slot PCI-E 4.0 SMT Type (x8 mode)
• Power Connector: ATX 24-Pin Power Connector
• PWR ON connector : JST compatible wafer 2pin (pitch=2.5mm) connector
  • Allows the upstream host to turn on the downstream sub-system's power.
  • For auto-switch you may use a cable (CB-00711) to join both PCIEX16D03 and Target cable adapter PWR ON connectors .
• Pin Header: Power switch / Power LED
• J1 / J3 Slot PCIe REFCLK Setting Switch (SW1-1: J1, SW1-2: J3)

  SW	REFCLK	Note
  *ON	Enable
  OFF	Auto	Enable ftom PRSNT2#

• SMbus Slave Address Setting Switch
  • J1 Slot: SMBus0
  • J3 Slot: SMBus1

  Slave Address A1 A0		SW2-1	SW2-2	SW2-3	SW2-4
  0 0	0xE0 W 0xE1 R	ON	ON	X	X
  0 1	0xE2 W 0xE3 R	OFF	ON	X	X
  1 0	0xE4 W 0xE5 R	ON	OFF	X	X
  1 1	0xE6 W 0xE7 R	OFF	OFF	X	X

• Dimensions
  • 105.84(W) x 170.3(L) mm 
  • It suits for ATX & MicroATX Form Factor Mounting
  • NW: 104.3g
• 

Note: The Target Cable Adapter must have PCIe REFCLK output.

PCIe x16

• EPCIE16XRDCA02A---External PCI Express (Two SFF-8644 1x2) to PCIe x16 Gen 3 Active (Redriver with Linear Equalization) Cable Adapter Card
  • Provide PWR ON connector
• EPCIE16XG4RDCA02---External PCI Express (Two SFF-8644 1x2) to PCIe x16 Gen 4 Active (Redriver with Linear Equalization) Cable Adapter Card
  • Provide PWR ON connector 

• CB-00711---JST Wafer 2pin Cable; Pitch=2.5mm, 26AWG, , L=30cm