Products/ PCIe to PCI Expansion / PCIe Docking / External Type

EDH-1XP32X40

Four PCI 32bit Slots Expansion Docking Station (3U half-width Rack Mount Chassis)

Highlights
  • Only half the size of 3U 19-inch rack mount chassis
  • Upstream PCIe: PCIe x1 (Gen 1: 2.5Gbps)
  • Four 5V/32-bit PCI slot
    • Provides four different Pin-selectable frequency (25, 50, 33, 66 MHz) options for PCI clock
  • Built-in 250W AC ( 100-240V, 50-60Hz)  to DC Switching Power Adapter
Introduction

The EDH-1XP32X40 expands PCI Express connectivity from your desktop computer, enabling seamless, high performance, and reliable control of up to four remote PCI devices.

No additional software or drivers are needed – the remote devices operate as if they were directly installed in your computer.

Designed to overcome the limited PCI connectivity of most desktop computers, the EDH-1XP32X40 can be quickly and easily set up for multi-I/O, high throughput, or hazardous applications.

EDH-1XP32X40 includes a PCI Express x1 to PCI (32bit/66MHz) bridge with high performance and low power consumption. The typical usage for this device is for applications that require a “bridge” from legacy PCI products to new PCI Express based systems. EDH-1XP32X40 provides four PCI 5V/32-bit slots and one single-lane Internal PCIe port (IOI Proprietary) for connecting to the PCIe cable adapter through ePCIe x1 Cable. 

Technical Specifications

External PCI Express Docking Station

Model No. EDH-1XP32X40
Upstream host connector
  • One single-lane External PCIe port
    • EPCIE1XP32X40M: Molex TDP18 Circuits Connector
    • EPCIE1XP32X40D: IOI DP Connector (20pin)
Downstream Internal PCI bus interface
  • Four 5V/32-bit PCI slot
    • Provides four different Pin-selectable frequency (25, 50, 33, 66 MHz) options for PCI clock
PCI Express features
  • Compliant with PCI Express Base Specification, Revision 1.1
  • Compliant with PCI Express Card Electromechanical Specification, Revision 1.1
  • Compliant with PCI Express to PCI/PCI-X Bridge Specification, Revision 1.0
  • Physical Layer interface (x1 link with 2.5Gb/s data rate)
  • Lane polarity toggle
  • Virtual Isochronous support (upstream TC1-7 generation, downstream TC1-7 mapping)
  • ASPM support
  • Beacon support (but does not support WAKE# signal during power management)
  • CRC (16-bit), LCRC (32-bit)
  • ECRC and advanced error reporting
  • Maximum payload size to 512 bytes
PCI features
  • Compliant with PCI Local Bus Specification, Revision 3.0
  • Compliant with PCI-to-PCI Bridge Architecture Specification, Revision 1.2
  • Compliant with PCI Bus PM Interface Specification, Revision 1.1
  • Compliant with PCI Hot-Plug Specification, Revision 1.1
  • Compliant with PCI Mobile Design Guide, Version 1.1
  • 3.3V PCI signaling with 5V I/O tolerance
  • Provides two level arbitration support for four PCI Bus masters
  • 16-bit address decode for VGA
  • Subsystem Vendor and Subsystem Device IDs support
  • PCI INT interrupt or MSI Function support
General features
  • Compliant with Advanced Configuration and Power Interface Specification (ACPI), Revision 2.0b
  • Forward bridging (PCI Express as primary bus, PCI as secondary bus)
  • Transparent mode support
  • Power Management (including ACPI, CLKRUN_L,CLKREQ_L, PCI_PM)
  • EEPROM (I2C) Interface
  • Auxiliary powers (VAUX, VDDAUX, VDDCAUX) support
  • Power consumption less than 0.45 Watt in typical condition
LED
  • DC Power LED
Power
  • Power Supply: 250W
  • Input: AC 100-240V, 50-60Hz
  • Output: +5V/14A, +3.3V/13A (+5V&+3.3V Combined Load Maximum 80W) +12V/18A (+12V1&+12V2 Combined Load Maximum 240W)
Dimensions

Half of 3U 19-inch rackmount chassis 221(W) x 132(H) x 225(D)mm

Weight 3kg

EPCIE1XCA03 for EDH-1XP32X40M

Upstream PCIe interface
  • 1-lane PCI Express

Downstream PCIe interface

  • 1.27mm (.050") Pitch TDP® (Triad® Differential Pair) PCIe x1 Receptacle Connector (18 Circuits)

EPCIE1XCA04 for EDH-1XP32X40D

Upstream PCIe interface
  • 1-lane PCI Express

Downstream PCIe interface

  • One single-lane External PCIe port (IOI Proprietary)
    • IOI DP Connector (20pin)

CB-00550 for EDH-1XP32X40M

Model No. AWG Length
CB-00550 28AWG 0.5m ± 0.025
CB-00550-01 28AWG 1m ± 0.05
CB-00550-02 28AWG 2m ± 0.1
CB-00550-03 28AWG 3m ± 0.1

CB-00614 for EDH-1XP32X40D

Model No. AWG Length
CB-00614 30AWG 1.5m
CB-00614-01 30AWG 1m
CB-00614-02 30AWG 2m
Applications
  • For the rack mount market, a set of two EDH-1XP32X40 as a stand-alone 3U rack mount storage is the most cost-effective option.

Available Models
EDH-1XP32X40M Molex TDP18 Circuits Connector EDH-1XP32X40D IOI DP Connector (20pin)
Kit includes

EDH-1XP32X40M-xx

  • EDH-1XP32X40M
  • AC power cord 6 feet length (option)
    • North America Plug (NEMA 5-15) --- CB-00260-02
    • Europe Plug (CEE 7-VII Schuko) --- CB-00264
    • British Standard Plug (BS 1363) --- CB-00103
    • Australia Plug (AS3112) --- CB-00272
  • EPCIE1XCA03--- ePCIe x1 (Molex TDP18) Cable Adapter Card
  • CB-00550-02--- ePCIe x1 (Molex TDP18) Cable (2m)
  • Overview

EDH-1XP32X40D-xx

  • EDH-1XP32X40D
  • AC power cord 6 feet length (option)
    • North America Plug (NEMA 5-15) --- CB-00260-02
    • Europe Plug (CEE 7-VII Schuko) --- CB-00264
    • British Standard Plug (BS 1363) --- CB-00103
    • Australia Plug (AS3112) --- CB-00272
  • EPCIE1XCA04--- ePCIe x1 (IOI DP) Cable Adapter Card
  • CB-00614--- ePCIe x1 (IOI DP) Cable (1.5m)
  • Overview
NO FILE AVAILABLE FOR DOWNLOAD!