Products / USB Battery Charging / Server / USB 3.0 to Mini-ITX

US1UI-32U3BC00

Octad Channel 32-port Front Panel USB 3.0 Barebone Server

Specifications

Downloads

Highlights

19-inch rack mount 1U chassis
- Supports rack mounting depth is 511/529/664mm
Built-in 800W AC (100-240V, 47-63Hz) to DC Switching Power Supply
Octa channel (Fresco FL1100-1Q0-EX x 8) 32-port (4-port x 8) USB 3.0 on front panel
Without Mini-ITX mainboard and I/O Bracket

Introduction

The US1UI-32U3BC00 is an Octad Channel 32-port Front Panel USB 3.0 Barebone Server.

Octad Channel 32-port Front Panel USB 3.0 are integrated by the following five key parts.

IP8X-PCIE8XG201
- Internal eight PCIe x1 to PCIe x8 Gen 2 Switch Host Card.
Four DU3-IPCIE2XG211
- Eight PCI Express to USB 3.0 Single Chip Host Controllers
Four CB-00592
19-inch rack mount 1U chassis
- Supports rack mounting depth is 511/529/664mm
Built-in 800W AC (100-240V, 47-63Hz) to DC Switching Power Supply

Utilizing the standard PCI Express Switch, the 16-Lane/16-Port PCI Express Switch provides the most efficient fan-out solution for integrating eight PCI Express to USB 3.0 Single Chip Host controllers into a small board design. Each USB 3.0 to PCI Express Single Chip Host controller takes advantages of 5 Gbps burst rate of 8-lane PCI Express bus in both directions and is fully compliant with PCI Express Base specification r2.0. This solution provides full PCI Express and USB 3.0 functionality and performance.

Technical Specifications

Physical Status
Form Factor	19-inch rack mount 1U chassis
Power Supply
Feature	Built-in 800W AC (100-240V, 47-63Hz) to DC Switching Power Supply. (PS-00051) Power Supply: 800W Input: AC 100-240V, 47-63Hz Output: +5V/25A, +3.3V/25A (+5V and +3.3V not excced 40A) +12V/57A Safety: UL, CUL, TUV, CCC
Drive bay
Number of Drives	Two (HDDs not included)
Drive Size	Two 2.5 inch One 3.5 inch + One 2.5 inch
Fan
Number of Fans	Three
Size	404028mm
Bearing	Ball Bearing
Voltage	DC12V
RPM	9200
CFM	15.3
dBA	40
Safety	UL(E77551), CUR(E77551), TUV
Pin
Front Panel I/O
USB3.0 Port	Octad channel ((Fresco FL1100-1Q0-EX x 8) 32-port (4-port x 8) USB 3.0 USB 3.0 cable port (Standard A-type Receptacle) lock mechanism
Mainboard Requirements
Form Factor	mini-ITX
Platform Requirements	Equipped with a PCIe x16 slot (Gen 2.0 x8 or x16 mode)
Back Panel I/O
I/O Bracket

Physical Dimensions

The size of 19-inch rack mount 1U chassis
444(W) x 44(H) x 502(D)mm
N.W.: 7.5 KG

Kit includes

US1UI-32U3BC00
AC power cord 6 feet length (option)
- North America Plug (NEMA 5-15) --- CB-00260-02
- Europe Plug (CEE 7-VII Schuko) --- CB-00264
- British Standard Plug (BS 1363) --- CB-00103
- Australia Plug (AS3112) --- CB-00272
Two Rear Mounting Brackets
- Supports rack mounting depth is 511/529/664mm (S-EC-00559-00-1620)
Driver CD
Manual